The Thermal Arc TIG Foot Amp Control for ET 186i and ET 141i AC/DC (W4013200) sports a 15ft cord with an 8 PIN connector, contactor on/off switch and current control. It's really a must if you're spending a lot of time with your Thermal Arc 186 Welder....
The Hypertherm max gouging nozzles are designed to work with the 220798 shield which has a larger opening for a greater amount of material removal. These gouging nozzles are designed for Duramax, Duarmax Lock, and Duramax retrofit torches. found on...
Used for welding type 309 wrought alloys and CH-20 cast alloys. Also used for welding dissimilar stainless steels and stainless to carbon steel. Tensile strength 90,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click...
Crown Silicon Bronze is a copper-silicon-manganese alloy welding rod used to weld copper, brass and dissimilar combinations. Excellent results when used on galvanized and thin sheet metal using TIG or MIG. Please Note: Welding fumes and gases can be...
Royal 110 FCo is a special fabricated aluminum alloy with the flux contained in the core. This alloy can be used on all weldable grades of aluminum; including sheet, cast and wrought aluminum. For fabrication and repair of cracks or breaks, building up...
This is a Lincoln Ranger 10000 Canvas Cover. It will help protect your investment from dirt, dust, and grime. It fits Ranger 10000, Ranger 10000 Plus, Ranger 3-Phase, Ranger 8, Ranger 8 LPG, and Ranger 9. This canvas cover is flame retardant, mildew...
This is a triple deoxidized mild steel wire, which will give quality welds on most grades of steel. Good for TIG pipe welding. Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS information. Both...
Royal 13-25 FC is a premium quality, flux-cored tubular wire with excellent operating characteristics. It is a versatile joining, surfacing and build-up material which deposits "Hadfield" type manganese steel. Weld deposits work harden readily and may...
Similar usage as the 309, however, the lower carbon content increases resistance to intergranular corrosion and helps to inhibit weld cracking. Tensile strength 87,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click here...
Crown E308LT-1 FCo is an all-position gas-shielded flux cored stainless steel electrode for flux cored arc welding (FCAW). The E308LT-1 FCo will produce high quality weldments in all positions of welding. It is used for welding types 301, 302, 304,...
Similar usage as 309L, however, the higher silicon content increases wetability and welder appeal. Tensile strength 87,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS information. Both...
Similar usage as E316/ER316, however, the lower carbon content increases resistance to intergranular corrosion and helps to inhibit weld cracking. Tensile strength 82,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click...
Crown ALB-30 is a versatile and highly alloyed bronze wire used to weld a wide variety of ferrous and nonferrous metals. This alloy is used to join aluminum bronze, high strength copper-zinc alloys, silicon bronze, copper-nickel alloys, manganese...
Used for welding cast alloys of similar composition. Best to use when chemistry of base metal is unknown. Tensile strength 115,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers MSDS...
Used for welding type 310 and 314 wrought alloys and CK-20 cast alloy. Also used for welding dissimilar stainless steels. Tensile strength 86,000 PSI Please Note: Welding fumes and gases can be hazardous to your health. Click here for the manufacturers...
Thermal Dynamics 90A/100A for the SL100 Torch. Sold as a package of 5.
Crown ER 100S-1 will deposit high-strength, very tough weld metal for critical applications. Originally developed for MIG (GMAW) and TIG (GTAW) welding HY-80 steel for military applications (ships, tanks and submarines), Crown ER 100S-1 is also used...
Used to weld 330 wrought alloys and HT cast alloys. Excellent high temperature characteristics make it the first choice for work on heat treat and other type of furnaces. Tensile strength 86,000 PSI Please Note: Welding fumes and gases can be hazardous...
For use on tools and dies of the 5% chrome type and the high chrome varieties. A-2 through A-5; also D-1 through D-7. Examples include extrusion dies, blanking dies, coining dies, mandrels and forming dies. Please Note: Welding fumes and gases can be...
For repair and buildup on dies, molds and holder blocks used for zinc and plastic injection molds. Crown PIM-10 is designed to match the wear and polishing characteristics of most injection-mold steels. Deposits are dense, tough and machinable. Used...
